Thinborne iPhone 15 Series Case Installation and Removal Guide

Welcome to the Thinborne iPhone 15 Series Case Installation and Removal Guide. Follow these simple steps to ensure a smooth and hassle-free experience with your Thinborne case.

Installation:

  1. Inspect Your Case:

    • Ensure that your Thinborne case is free from any defects or damage.
    • Check if all the cutouts align with the phone's features.
  2. Prepare Your iPhone:

    • Power off your iPhone before installation.
  3. Insert the iPhone:

    • Slide your iPhone into the case, starting from the side with the buttons.
    • Ensure that the corners of your iPhone fit snugly into the case.
  4. Secure the Case:

    • Gently press down on the edges of the case to secure it in place.
  5. Check Accessibility:

    • Confirm that all buttons, ports, and features are easily accessible.

Uninstallation:

  1. Clean and dry your hands :

    • Before removing the case, please make sure to clean and dry your hands.
  2. Locate the Opening:

    • Look for the opening at the bottom or one of the corners of the case.
  3. Apply Gentle Pressure:

    • Apply gentle pressure to the opening to release the case from your iPhone.
  4. Slide Out Your iPhone:

    • Carefully slide your iPhone out of the case.
  5. Inspect Your iPhone:

    • After removal, inspect your iPhone for any potential damage.

Additional Tips:

  • To clean your case, use a soft, lint-free cloth.
  • Avoid using sharp objects to remove the case, as it may cause damage.
  • If you encounter any issues or have questions, contact our customer support.

Congratulations! You have successfully installed and uninstalled your Thinborne iPhone 15 Series Case.

If you have any further questions or need assistance, feel free to reach out to our dedicated customer support team.