How To Clean Your Aramid Fiber Phone Case?

How To Clean Your Aramid Fiber Phone Case?

Written by: Joanavi Fernan



Time to read 5 min

Easy and Safe Ways To Clean Your Aramid Fiber Case

Our thin phone case is more familiar with the ground than we'd like to admit. They're dropped, tossed, and handled with less care than they deserve. And let's not even start on where they've been. The truth? Your phone case is a breeding ground for germs. Quite frankly, it's gross. But fear not, because this week, we're going on a mission to make your phone case sparkle like new or as close to it as possible.

The Dirty Truth About Your Phone Case

When did you last take a good, hard look at your phone case? If it's been a while, you might be shocked. Beyond the visible dirt and grime, a lot is going on that we'd rather not think about. From daily adventures in and out of our pockets to those accidental drops on the floor, it's no wonder our phone cases are less than pristine.

Wipe Your Phone Case

What is Aramid Fiber?

Before discussing cleaning methods, it's essential to understand what makes Aramid fiber unique. This synthetic fiber is prized for its heat resistance and strength-to-weight ratio, making it ideal for phone cases that need to be both protective and lightweight. Its texture and composition require specific care to maintain its integrity and appearance.The unique composition of Aramid fiber makes it susceptible to damage from aggressive cleaning agents and tools, which can lead to wear or discoloration over time. Experts recommend sticking to gentle cleaning routines to keep your case looking its best.

Recommended Cleaning Practices

1. Regular Wipe-Downs

Using a microfiber cloth, gently wipe down the surface of your Aramid fiber case every few days to remove smudges and grime. This simple step can significantly reduce the buildup of dirt and bacteria.

2. Mild Soap Solution

A mild soap solution can be used for a deeper clean. This should be applied sparingly with a damp cloth, ensuring the case is not soaked but lightly cleaned to remove any stubborn dirt.

3. Avoid Harsh Chemicals

It's essential to steer clear of harsh cleaning agents such as bleach or alcohol-based solutions, which can compromise the integrity of the Aramid fibers.

4. Dry Thoroughly

After cleaning, ensure the case is completely dry before reattaching it to your phone. This prevents any moisture from getting trapped between the case and the phone, which could potentially cause damage.

By incorporating these simple practices into your routine, you can ensure that your Aramid fiber phone case offers optimal protection for your phone while maintaining its aesthetic appeal. Remember, the longevity and performance of your protective case largely depend on how well you care for it.

The Best Way to Clean Your Aramid Fiber Phone Case

Here's a gentle yet effective method to clean your Aramid fiber carbon fiber phone case without compromising its integrity.

Needed Supplies:

  • Mild dish soap
  • Lukewarm water
  • Soft-bristled brush (like a toothbrush)Microfiber cloth

Best And Safe Way To Clean Your Phone Case

Step-by-Step Cleaning Guide

Step 1. Prep Your Workspace

Begin by removing your phone from its case. It's always best to clean the case separately to avoid water damage to your phone.

Step 2. Mix Your Solution

Combine a few drops of mild dish soap with lukewarm water in a bowl. The goal is to create a gentle cleaning solution that won't harm the Aramid fibers.

Step 3. Gentle Scrubbing

Dip the soft-bristled brush into the soapy water and softly brush the case. Pay special attention to any areas with visible dirt or grime buildup. The goal is to lift the dirt without being too harsh on the fibers.

Step 4. Rinse and Dry

After you've gently scrubbed the case:

  • Rinse it under lukewarm running water.
  • Make sure all soap residue is removed.
  • Use a microfiber cloth to pat the case dry gently.
  • Allow it to air dry completely before reattaching it to your phone.

Watch this quick and easy tutorial on How to Clean Your Phone Case now.

Tips on Maintaining Your Aramid Fiber Case

To keep your Aramid fiber case in top shape, adopt a careful and consistent maintenance routine. Here are some consolidated tips on how to keep your case looking great and performing well over time:

1. Regular Cleaning

Regular cleaning is a cornerstone of maintaining the quality of your Aramid fiber case. Without regular cleaning, these substances can build up on the surface of the case, leading to potential staining, discoloration, and even a decrease in the material's integrity over time.

A consistent cleaning routine helps prevent this buildup, ensuring that the Aramid fiber maintains its aesthetic appeal and keep colors vibrant and textures intact. Moreover, it contributes to the functional preservation of the case by preserving the fiber's structural qualities, such as its resistance to wear and tear.

2. Avoid Direct Sunlight

Prolonged exposure to direct sunlight can harm Aramid fibers, potentially leading to fading or weakening of the material. Whenever possible, store your phone in a shaded, cool place to protect the integrity of the case.

3. Quick Touch-Ups

Quick touch-ups can help maintain the case's cleanliness and appearance between deeper cleaning sessions. A light spray of dish soap and water solution on a microfiber cloth can do wonders for removing daily smudges and fingerprints. A bit of rubbing alcohol on a cloth can be used for disinfecting purposes. This helps eliminate germs without causing damage.

4. Avoid Extended Storage in Pockets or Bags

Experiencing color fade on a phone case can be puzzling and frustrating. To prevent this issue, minimizing the time your phone, encased or not, spends tucked away in your pocket or bag is wise. The constant rubbing against your hands or other items can lead to the case's color wearing off. 

Moreover, the environment inside a pocket or bag isn't ideal for the longevity of your phone or its case. Pockets and bags often contain items like keys, books, and various hard objects that can scratch and damage the surface of your case, leading to eventual color fading. Keeping your Aramid fiber phone case out of confined spaces as much as possible can help maintain its appearance and integrity.

Tips on Maintaining Your Aramid Fiber Case

Why Does This Matter?

Cleaning and maintaining your Aramid fiber phone case not only keeps it looking new but also ensures it continues to provide optimal protection for your phone. Given the unique qualities of Aramid fiber, understanding and applying the appropriate care techniques is crucial.

By incorporating this simple cleaning routine, you can ensure your high-tech Aramid fiber case remains in top condition, protecting your smartphone while showcasing its sleek and modern design.

Final Thoughts

Caring for an Aramid fiber phone case is about safeguarding a device. It's also about preserving a piece of advanced material technology that blends elegance with resilience. Adhering to these straightforward yet effective practices ensures that your Aramid fiber case remains as durable and stylish as the day you first slipped it onto your phone. 

Embrace these tips to extend the life of your phone case and continue enjoying the unparalleled combination of toughness and lightweight design that Aramid fiber phone case offers. Here's to keeping your phone secure and stylish in a world that demands both.

Explore more about how the Thinborne Aramid Fiber Case can transform your iPhone and Android  experience. Click to learn more and be a part of the future of phone cases today!

Products Featured In This Blog

About the Author: Joan F

General manager of Thinborne - the super thin phone case made of aramid fiber.

"I am a tech nerd who's obsessed with everything Apple. With plenty of experience in the tech world, I enjoy sharing tips and tricks to help folks get thea most out of their devices. When I'm not glued to my screen, you can find me hiking or cooking up a storm in the kitchen."

Related Readings

Leave a comment