Will the Galaxy Z Flip 7 FE Case Fit the Z Flip 7? 2025 Guide

Two almost identical Samsung foldable models in 2025 are getting the attention they deserve: the Galaxy Z Flip 7 and the Galaxy Z Flip 7 FE (Fan Edition).

Both are clamshell-style flip phones, share the same core design concept, and have near-identical camera placement. So it’s natural to wonder:  Can you use a Galaxy Z Flip 7 FE case on the Z Flip 7 (and vice versa)?

If you’re buying a Z Flip 7 or Galaxy Z Flip 7 FE case, especially a snug-fitting or minimalist one, it’s worth understanding why cross-compatibility isn’t guaranteed and what to look for instead.

Let’s unpack it.

The short answer? No, not reliably.

Despite their similarities, the Flip 7 and Z Flip 7 FE have subtle but important differences in physical dimensions, external screens, and button placement.

Thus, a Galaxy Z Flip 7 case will not fit the Z Flip 7 FE, and vice versa.

What Makes the Z Flip 7 and Z Flip 7 FE Look So Similar?

At first glance, both the Flip 7 and the Flip 7 FE fold vertically into a compact square, have dual rear cameras arranged horizontally, and include a front-facing external display (a.k.a. FlexWindow).

They also feature the same 50MP + 12MP camera hardware, USB-C ports at the bottom, and side-mounted fingerprint sensors integrated with the power button.

If you’re looking at them from across the room, or even holding them briefly, you might assume they’re the same device. And that’s where confusion begins for accessory buyers.

Here’s why the Flip 7 and Flip 7 FE cases aren’t interchangeable.

While both phones share the same overall form factor, they differ slightly in dimensions:

That extra 1.2 mm of thickness on the FE version may not seem like much, but it’s enough to affect how a case fits.

Even a slightly snug case designed for the slimmer Flip 7 may not snap on properly to the thicker FE. Or worse, it might cause stress on the hinge or FlexWindow if forced to fit.

The cover screens are completely different, and that has a direct impact on front housing cutouts:

• Flip 7 : 4.1″ edge-to-edge external screen, 120Hz, 1048×948 resolution
  
  

• Flip 7 FE : 3.4″ smaller window-style display, 60Hz, 748×720 resolution
  
  

Because of the Flip 7’s larger, more squared-off external display, many cases feature cutouts or frames shaped specifically to highlight or frame the cover screen.

Put a Flip 7 case on a Flip 7 FE? The display cutout may misalign entirely, partially cover the screen, or leave too much unused space. That’s both a functional and aesthetic issue.

Both phones have similar power and volume button locations, but tolerances vary slightly due to the thickness and chassis differences. Some slim cases, especially those with precision button cutouts (rather than flexible button covers), may not line up well.

Misaligned buttons aren’t just annoying. They can make daily use difficult and reduce overall button feedback.

In most cases, one of these issues will happen:

• Case won’t close properly or will bulge along the hinge

• Cover screen won’t align with the cutout

• Button cutouts or port openings are off
  

• May pop off during use due to improper fit
  
  

It defeats the purpose of protecting your phone. Hinge protection and cover screen precision are critical in foldable phones.

Look for model-specific listings. At ThinBorne, we clearly state the model compatibility.

Here’s what to check:

• Model Name: Ensure it says “Galaxy Z Flip 7 FE” or “Galaxy Z Flip 7”. If it just says “Flip 7 series,” that’s vague — double-check the fine print.

• Cover Screen Cutout Design: Look at product photos. A large, rectangular cutout = Flip 7. A smaller circular/square cutout = Flip 7 FE.

• Dimensions in mm: If listed, compare to your phone’s dimensions to see if it’s a match.

• Retailer Q&A or Reviews: Other buyers often mention if it fits or not. A quick scan can save you trouble.

For minimalists or anyone who wants a barely-there case that still protects, ThinBorne is the best option:

• Made from 600D aramid fiber

• Ultra-thin, under 0.04 inches

• Includes front cover, back housing, and tempered glass screen protector

• Engineered specifically for Flip 7 (or Flip 7 FE — sold separately)

• No branding, no bulk, just clean matte texture and grip
  
  

If you own a Flip 7 FE, ThinBorne offers a separate version precisely molded for that model’s added thickness and smaller front display. Don’t try to make one version stretch across both — it won’t end well.

To recap:

• No, Galaxy Z Flip 7 FE cases do not fit the Galaxy Z Flip FE reliably (and vice versa).

• They have different thickness, cover screen sizes, and small design details that matter, especially for snap-on or minimalist cases.
  
  

• A proper-fitting case matters more with foldables, where hinge tolerance, button feedback, and screen cutouts affect both protection and daily usability .
  
  

If you’re buying a case for either phone, be specific: check the model, the design details, and don’t assume one size fits all.

And if you want a premium case that complements the Flip’s sleek design without compromising on protection, ThinBorne’s lineup for both models is worth a look!