iPhone Duo Case Installation Guide
Watch the installation video below for a clean, secure fit.
Getting the Perfect Fit
We put thin adhesive strips on the top and bottom edges of every Duo back piece as an extra precaution, so it grips your phone more firmly.
Aramid fiber is very rigid, so sometimes the strips keep the back from sitting completely flush, especially near the hinge.
If the fit doesn't feel quite right:
1.Gently take the back piece off your phone.
2.Peel the adhesive strips off its top and bottom edges.
3.Wipe the area with a dry, lint-free cloth.
4.Put the back piece back on and press it firmly into place.
The back piece works perfectly without the strips. They're only there to add a little extra grip.
Before You Begin
Wash and dry your hands. Clean your phone with a soft microfiber cloth, especially along the edges. Check the case pieces and any supplied adhesive strips. Do not install a case with a visibly bent corner or damaged frame.
Installation Steps
01 — Prepare the case. Identify the front and back pieces. Check the placement of any pre-applied adhesive and keep its protective liner on until you are ready.
02 — Fit the back cover. Align the camera opening and gently seat the cover evenly. Do not twist or force the thin material.
03 — Fit the front frame. Align it carefully with the outer display and hinge-side edge. If adhesive is present, remove its protective liner immediately before fitting the piece.
04 — Secure and inspect. Apply gentle, even pressure where adhesive is fitted. Check that corners sit flush and that buttons and ports remain accessible.
05 — Test the fold. Slowly open and close the phone. Stop if you feel resistance or notice any rubbing or lifting.
Screen Protector & Care Tips
Install the case first, followed by a compatible tempered glass screen protector. Third-party protectors may not fit correctly. The slim front frame can move slightly and may lift a protector’s edges. Avoid repeatedly removing adhesive-backed pieces; use fresh adhesive strips when needed.
Need a Hand?
If a corner is bent, the case will not sit flush, or the frame feels loose, please do not force it. Email info@thinborne.com with photos and your order number. We’re happy to help.
Explore More Thinborne Cases
Discover more ultra-thin designs, premium aramid fiber, and MagSafe-ready cases.